Single Supply fault Monitor Circuit Diagram

This Single Supply fault Monitor Circuit Diagram shows a typical over/under-voltage fault monitor for a single supply. The upper trip points, controlling OUT 1, are centered on 5.5 V with 100 mY of hysteresis Wu = 5.55 V, `L = 5.45 V); and the lower trip points, controlling OUT 2, are centered on 4.5 V, also with 100 mV of hysteresis. OUT 1 and OUT 2 are connected together in a wired OR configuration to generate a power OK signal.


Single Supply fault Monitor Circuit Diagram

Single Supply fault Monitor Circuit Diagram

0 comments:

Post a Comment

 

Copyright @ 2013 Electronic Circuit Diagrams & Schematics.

Designed by AS & AS