Telephone Call Recorder

Today phone has become an integral part of our lives. It is the most widely used communication tool in the world. Owing to its immense popularity & widespread use, there arises a necessity for call recording devices, which find application in call cent-res, stock broking firms, police, offices, homes, etc. Here they are describing a call recorder that makes use of only a few parts. But in order to understand its working, must first have the basic knowledge of standard phone wiring as well as a stereo plug.


In India, land-line rings primarily use RJ11 wiring, which has wires-tip and ring. While tip is the positive wire, ring is the negative. And together they complete the phone circuit. In a phone line, voltage between tip and ring is around 48V DC when handset is on the cradle(idle line). In order to ring the phone for an incoming call, a 20Hz AC current of around 90V is superimposed over the DC voltage already present in the idle line. The negative wire from the phone line goes to IN1, while the positive wire goes to IN2. Further, the negative wire from OUT1 and the positive wire from OUT2 are connected to the phone. All the resistors used are 0.25W carbon film resistors and all the capacitors used are rated for 250V or more.


0 comments:

Post a Comment

All updates in Your Inbox

Enter your email address:

Delivered by FeedBurner

,

 

Copyright @ 2013 Electronic Circuit Diagrams & Schematics.

Designed by AS & AS